Spot Welding Error Analysis in Making Rear Brake Arm in Spot Welding Part at PT. XYZ
Abstract
As a manufacturing company engaged in the manufacture of automotive parts, it produces components for motorized vehicles, especially for two wheels, with the production of spare parts in the form of arm rear brakes. In the manufacture of these spare parts, it is really necessary to pay attention to all the needs, such as materials which, in other words, really have an influence on the strength of the material. Included in the process that goes through spot welding, it needs to be considered in the stages of the process to be optimal because, if not, it will cause failure of a product so that defective products are obtained at this welding point. Improvement of the production process of this product can be done by identifying control factors and arrangements using the 5 why analysis, fishbone, and pareto methods until the production process is stable and the results obtained are good and according to the expected standards until the needs of all parties are met.
Downloads
References
Bizplus, "Pentingnya ISO 9001:2015 Untuk Manajemen Perusahaan," https://bizplus.id/, 4 September 2023. [Online]. Available: https://bizplus.id/pentingnya-iso-9001-2015/.
Badan Pusat Statistik, "Statistik Transpotasi Darat," Direktorat Statistik Distribusi, Jakarta, 2023.
K. B. S. Alvin Iskandar Aditya, "Proses Produksi Arm Rear Brake Tipe Kyea Untuk Sepeda Motor Honda Verza PT. Ciptaunggul Karya Abadi," Jurnal Pendidikan Teknik Mesin Undiksha, vol. 11, no. 2, pp. 146-159, 2023.
R. A. P. V. P. F. Reza Setiawan, "SIMULASI PROSES BENDING ARM REAR BRAKE DENGAN VARIASI KECEPATAN PEMBEBANAN TERHADAP STRESS MATERIAL MENGGUNAKAN ANSYS," Jurnal Barometer, vol. 4, no. 2, pp. 261-266, 2020.
A. H. M. H. Ferry Utama Dwi Putra, "Analisis Penerapan Manajemen Persediaan Bahan Baku Arm Rear Brake Kyea dengan Metode EOQ," Jurnal Serambi Engineering, vol. 7, no. 1, pp. 2561-2570, 2022.
K. Muhammad Rifqi Firdaus, "Hasil Proses Broaching Pada Lubang Arm Rear Brake Menggunakan Metode Taguchi Di PT. Ciptaunggul Karya Abadi," Jurnal Sigmat, vol. 2, no. 1, pp. 12-19, 2022.
M. F. H. B. A. HALIM, "EFFECT OF SPOT WELDING PROCESSING PARAMETERS ON FERROUS AND NON FERROUS METAL," Universiti Sains Malaysia, Penang, Malaysia, 2018.
Ciptaunggul Karya Abadi.Inc, "Company Profile PT. Ciptaunggul Karya Abadi," 2022. [Online]. Available: www. ciptaunggul.com.
N. I. S. B. W. N. D. S. Nur Ichsan Sumardani, "Defect Analysis of Carbonsteel Pipe Welding Connections Using Non-Destructive Testing with the Penetrant Test Method," Jurnal Risenologi, vol. 5, no. 1, pp. 38-47, 2020.
T. M. &. D. Kadarisman, Sistem jaminan mutu industri pangan, Bogor: IPB Press, 2012.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License