Analisa Penggunaan Support Frame Lama Pada Desain Baru Screw Conveyor Machine Menggunakan Metode Elemen Hingga
Abstract
Frame construction is one of the things that must be considered in the process of designing a machine, for that the design of the strength of the frame is an important thing in order to withstand the load and support the various components contained in the machine and analyze the strength of the frame related to the capacity of the screw conveyor machine.This study aims to analyze the structural strength of the Support frame which is used to support the new design of the screw conveyor machine in the process of moving and draining wet plastic pieces. The method used in this design includes collecting data, creating a 3D model using solidwork software, then analyzing the structure using the Finite Element Analysis (FEA) simulation method. The results of the FEA simulation on the truss construction with a loading of 4,049 N get the highest stress value (stress) with the centralized loading method of while with the uniform loading method of , compared to the yield strength value of 250.000.000 the support fream construction is safe to use, the displacement (deflection) with the uniform loading method is 0.4 mm while the concentrated loading method is 0.77mm, The simulation results of factor of safety analysis from uniform loading are 10 while for the centralized loading method the factor of safety value is 4, so it is concluded that this design is feasible to use and the safety factor is good.
Downloads
References
ASTM A36 (2015) ‘Standard Specification for Carbon Structural Steel’, Current, 89(Reapproved), pp. 6–7.
Attorik, A.A. et al. (2022) ‘Simulasi dan Analisa kekuatan Pembebanan Frem pada Perancangan Mesin Press Bearing Manual Hydraulic Jack Menggunkaan Autodesk Inventor’, 4(1), pp. 19–25.
Badruzzaman, B., Endramawan, T. and ... (2020) ‘Analisis Kekuatan Pembebanan Rangka Pada Perancangan Mesin Grading fish Jenis Ikan Lele Menggunakan Simulasi Solidworks’, Prosiding Industrial …, pp. 26–27. Available at: https://jurnal.polban.ac.id/proceeding/article/view/2004.
Irawan, H. and Suhayat, B. (2020) ‘Analisis Desain Kerangka Mesin Pengering Padi Rotary Dryer Dengan Empat Bantalan Rol Menggunakan Software CAD’, MEKANIKA: Jurnal Teknik Mesin, 6(1), pp. 14–17. Available at: http://jurnal.untag-sby.ac.id/index.php/MEKANIKA/article/view/4030.
Ismail, R., Sitanggang, F.A. and Ariyanto, M. (2019) ‘Analisis Kekuatan Struktur Wereable Elbow Exoskeleton untuk Penderita Kelumpuhan Gerak Siku Menggunakan Finite Element Method (FEM)’, Rotasi, 21(3), p. 193. doi:10.14710/rotasi.21.3.193-199.
Khurmi, R.. and Gupta, J.K. (2005) A Textbook of Machine Design. New Delhi: Eurasia Publishing (PVT.) Ltd.
Making Oceans Plastic Free, "The Hidden Cost of Plastic Bag Use and Pollution in Indonesia" https://makingoceansplasticfree.com, 2017. [Online]. Available: https://makingoceansplasticfree.com/hidden-cost-plastic-bag-use-pollution-indonesia/
Mananoma, F., Sutrisno, A. and Tangkuman, S. (2018) ‘Perancangan Poros Transmisi Dengan Daya 100 HP’, Jurnal Teknik, 6(1), pp. 1–9.
Mulyadi, S. (2011) ‘Analisa tegangan-regangan produk tongkat lansia dengan menggunakan metode elemen hingga’, Jurnal ROTOR, 4, p. 1.
Norton. (2006). Machine Design: An Integrated Approach. Prentice Hall
Owen, P.J. and Cleary, P.W. (2009) ‘Prediction of screw conveyor performance using the Discrete Element Method (DEM)’, Powder Technology, 193(3), pp. 274–288. doi:10.1016/j.powtec.2009.03.012.
Patil, K.Y. and Deore, E.R. (2015) ‘Stress Analysis of Ladder Chassis with Various Cross Sections’, IOSR Journal of Mechanical and Civil Engineering Ver. III, 12(4), pp. 2278–1684. doi:10.9790/1684-1243111116.
Puspitasari, N.A. and Nugraha, P. (2021) ‘Seminar Nasional-XX Simulasi Stress Analysis Pembebanan Statis Dengan Bantuan Software SolidWorks Pada Hasil Perancangan Ladder Frame Chassis Mobil Listrik Menggunakan Material AISI 4340’, (November), pp. 25–33.
Rantawi, A.B. (2013) ‘Perancangan Unit Transfer (Screw Conveyor) Pada Mesin Pengisi Polibag Untuk Meningkatkan Efektvitas Kinerja Di Bidang Pembibitan’, 4(1), pp. 1–23.
Shaikh, saheb M. et al. (2014) ‘A Review on Design Analysis & Optimization of Screw Conveyor’, pp. 0–4.
Sungkono, I., Irawan, H. and Patriawan, D.A. (2019) ‘Analisis Desain Rangka Dan Penggerak Alat Pembulat Adonan Kosmetik Sistem Putaran Eksentrik Menggunakan Solidwork’, Seminar Nasional Sains dan Teknologi Terapan VII 2019, pp. 575–580.
Suprayogi, A. and Tjahjanti, P.H. (2017) ‘Analisa Surface Preparation pada Plat Baja ASTM A36’, Seminar Nasional dan Gelar Produk, pp. 188–197.
Copyright (c) 2023 Timotius Kristiawan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
