Manufaktur Prototipe Mobil Listrik SULA Politeknik Negeri Subang
DOI:
https://doi.org/10.29407/jmn.v7i2.14075Keywords:
manufaktur, prototipe mobil listrik sula evolution, sistem pengereman, pemasangan sistem pengereman., rangka , suspensiAbstract
Penelitian ini bertujuan untuk membuat prototipe mobil listrik sula Politeknik Negeri Subang. Proses manufaktur melalui beberapa tahap seperti membaca desain rancangan, mengukur benda kerja, memotong benda kerja, penyambungan, assembly, dan uji coba. Proses ini sangat menunjang hasil akhir pada manufaktur rangka utama mobil listrik sula. Hasil rangka mobil listrik sula dilakukan dengan uji jalan trak 1 km dan beban penumpang 50 kg. Berdasarkan hasil penelitian dapat disimpulkan bahwa prototipe mobil listrik sula yang dibuat telah memenuhi standar untuk diikutkan dalam lomba mobil listrik Nasional.
Downloads
References
M. J. NYAGA, “DEVELOPING AND BUILDING A PROTOTYPE REAR WHEEL DRIVE ELECTRIC CAR,” no. May, 2009.
C. O. Quandt and S. Innovation, “Manufacturing the electric vehicle : a window of technological opportunity for Southern California,” no. February 1995, 2014.
A. Guizani, M. Hammadi, J. Choley, and T. Soriano, “M echanics I ndustry Electric vehicle design , modelling and optimization,” no. March, 2016.
A. Efendi and Y. S. Nugroho, “Has the Electrical Laboratory of Subang State Polytechnic Applied,” vol. 2, no. 2, pp. 47–52, 2019.
K. A. Efendi; D, “Evaluation of the Application of Occupational Safety and Health (OSH) at the Subang State Polytechnic Lab,” Automot. Exp., vol. 2, no. 1, pp. 9–14, 2019.
S. Carlos, A. De Almeida, and F. Vieira, “Modeling and Analysis of an Electric Vehicle using PAMVEC COBEM-2017-1852 MODELING AND ANALYSIS OF AN ELECTRIC VEHICLE USING,” no. December 2017, 2018.
Ary Fadilah, Bustami Syam. "analisis simulasi struktur chassis mobil usu berbahan besi struktur terhadap beban statik dengan menggunakan perangkat lunak ansys 14.5." 6 (2013).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Adhan Efendi
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
