Inovasi Mesin Pemipil Jagung Dengan Menggunakan Dinamo Listrik sebagai Sumber Energi Penggerak
DOI:
https://doi.org/10.29407/noe.v7i2.23856Keywords:
Petani, Pemipil Jagung, Inovasi, Dinamo Listrik, PorosAbstract
Corn farmers need a corn sheller machine design with a better working principle and effectiveness than the previous machine. The innovation of the corn sheller machine using an electric dynamo as a source of driving energy is a fairly interesting solution to increase efficiency and accuracy in the corn shelling process. The innovation of this corn sheller tool uses the ex - post facto method because the data obtained by researchers is data from events that have already taken place. Researchers only need to develop existing tools and there needs to be development of tools and materials such as sieves, casings, hoppers, exhaust pipes, electric dynamos, exhaust pipes, frames, pulleys, and v-belts. The results and calculations of this tool are, the planned power is 0.186 kw, the planned moment is 64.70 kg/mm, the shear stress is 3.08 kg/mm2, the shaft diameter is 7 mm, the shear stress on the shaft is 0.0806 kg/mm, with an engine speed of 2800 rpm, after the innovation of the tool was tested 3 times, then the average time was 2.5 minutes, with an actual tool capacity of 43.2 kg/hour. Compared to the previous tool, it could only shell around 20 kg/hour. By using an electric dynamo, it is more environmentally friendly, because the sound is not noisy and the use of electricity is not that large, therefore the innovation of this corn sheller machine is very useful for farmers in Slawe Village.
Keywords: Farmers, corn shellers, innovation, electric dynamo, shaft
References
Muhammad Rofi asyakur 2020. “Perancangan alat pemipil jagung dengan system horizontal.”
Robert L. Moot P.E 2019” Elemen-elemen mesin dalam penginovasian mekanis .2”. Edisi 1. Penerbit Andi, Yogyakarta.
Rasid. N. A., Lanya, B., and Tamrin 2015,” Menginovasi alat pemipil jagung semi mekanis.”J. Tek, petani, Indonesia.
Sularso, 2017,” Dasar perencanaan dan pemilihan elemen mesin pemipil jagung”
Setyono, N. D., 2009. ”Perencanaan mesin pemipil jagung dengan system roll .. pengatur,” pp.1-147.
Susanto, T.A.,and Dermawan. 2017. ”Rancang bangun mesin pemipil jagung skala industry rumah tangga.”
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
