PENGEMBANGAN PROTOTYPE JIG AND FIXTURE ATTACHMENT UNTUK MENAMBAH AXIS MESIN BUBUT

  • suta ari pradnyana Universitas Pendidikan Ganesha
  • I Nyoman Pasek Nugraha Universitas Pendidikan Ganesha
  • IGede Wiratmaja Universitas Pendidikan Ganesha
https://doi.org/10.29407/noe.v6i2.20192
Abstract views: 81 , PDF downloads: 109
Keywords: Mesin Bubut, Pengembangan, Prototype Jig and Fixture

Abstract

Penelitian ini dilakukan untuk mengetahui proses pengembangan Prototype Jig and Fixture Attachment, dan mengetahui tingkat kelayakan serta kepraktisan Prototype Jig and Fixture Attachment. Metode pengembangan penelitian menggunakan Research And Development R&D. Model pengembangan yang digunakan pada penelitian ini yaitu model pengembangan 4-D (Four-D). Jenis data pada penelitian ini yaitu berupa data kuantitatif. Dari uji survey pendahuluan yang dilakukan terhadap 10 orang responden, dinyatakan bahwa perlu adanya pengembangan Prototype Jig and Fixture Attachment untuk menambah Axis mesin bubut. Pada uji ahli desain didapatkan hasil persentase 100% yang berarti pengembangan Prototype Jig and Fixture Attachment untuk menambah Axis mesin bubut digolongkan sangat layak. Selanjutnya dilakukan uji ahli manufaktur didapatkan hasil persentase 100% yang digolongkan sangat layak. Dapat disimpulkan bahwa pengembangan Prototype Jig and Fixture Attachment untuk menambah Axis mesin bubut sangat layak dan praktis untuk dikembangkan.

 

References

Ardian, A., & Marwanto, A. (2018).Rancang Bangun Universal Cylindrical Grinding. Jurnal Dinamika Vokasional Teknik Mesin, 3(1), 41–47.
Faisal, B. (2021). Rancang Desain Alat Peraga Elektro Pneumatik Menggunakan Perangkat Lunak Solidworks 2016. 2–6.
Poeng, R., Rauf, F. A., Teknik, J., Fakultas, M., Universitas, T., & Ratulangi, S. (2015). Analisis Pengaruh Putaran Spindle Terhadap Gaya Potong Pada Mesin Bubut.
Jurnal Tekno Mesin, 2(2), 6–11.
Prassetiyo, H., Rispianda, R., & Adanda,
H. (2016). Rancangan Jig Dan Fixture Pembuatan Produk Cover on-Off. Teknoin, 22(5), 350–360. https://doi.org/10.20885/teknoin.vol2 2.iss5.art4
Rosidi, & Yuwono, B. (2021). Rancang Bangun Jig and Fixture untuk Pembuatan Kunci Chuck Bubut. 2, 104–110.

PlumX Metrics

Published
2023-10-26
How to Cite
ari pradnyana, suta, Nugraha, I. N. P., & Wiratmaja, I. (2023). PENGEMBANGAN PROTOTYPE JIG AND FIXTURE ATTACHMENT UNTUK MENAMBAH AXIS MESIN BUBUT. Nusantara of Engineering (NOE), 6(2), 190-199. https://doi.org/10.29407/noe.v6i2.20192
Issue
Vol. 6 No. 2 (2023): Volume 6 No 2 Tahun 2023
Section
Artikel

Copyright (c) 2023 suta ari pradnyana, I Nyoman Pasek Nugraha, IGede Wiratmaja

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Copyright on any article is retained by the author(s).
  2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
Crossref
Scopus
Google Scholar
Europe PMC