Analysis of Functional Suitability and Usability in Sales Order Procedure to Determine Management Information System Quality
Abstract
In the development of information systems, it is very important to pay attention to the quality of the system which can be reviewed through aspects of usability for its users and following the needs and specifications of its users. This study will analyze the quality of the sales order management information system based on two characteristics of the ISO 25010 quality standard system, namely functional suitability and usability. The functional suitability test was carried out by the BlackBox testing method to test three sub-characteristics of functional suitability that are functional completeness, functional correctness, and functional appropriateness. Usability tests use a use questionnaire which is divided into four criteria that are usefulness, ease of use, ease of learning, and satisfaction. In testing the suitability of functionality involving 5 respondents and 17 respondents in usability testing. The results of this study indicate that the sales order management system fulfills two characteristics of information system quality that are functional suitability and usability. Where all the features designed are by the successful features, and the usability characteristics are 85.45% which indicates that the system is very feasible to implement.
Downloads
References
I. P. A. Putra Yudha, M. Sudarma, and P. Arya Mertasana, “Perancangan Aplikasi Sistem Inventory Barang Menggunakan Barcode Scanner Berbasis Android,” J. SPEKTRUM, vol. 4, no. 2, p. 72, 2018, doi: 10.24843/spektrum.2017.v04.i02.p10.
H. Haslinda et al., “Evaluation of e-Book applications using ISO 25010,” 2nd Int. Symp. Technol. Manag. Emerg. Technol. ISTMET 2015 - Proceeding, no. October 2017, pp. 114–118, 2015, doi: 10.1109/ISTMET.2015.7359012.
H. Setiawan and H. Jati, “Analisis Kualitas Sistem Informasi Pantauan Pembentukan Karakter Siswa Di Smk N 2 Depok Sleman,” Elinvo (Electronics, Informatics, Vocat. Educ., vol. 2, no. 1, pp. 102–109, 2017, doi: 10.21831/elinvo.v2i1.16427.
K. Budiarta, A. Iskandar, and M. Sudarma, “Audit Information System Development using COBIT 5 Framework (case Study: STMIK STIKOM Bali) Komang,” Int. J. Eng. Emerg. Technol., vol. 1, no. 1, pp. 1–5, 2016.
P. A. Ariawan, I. S. Putra, and I. M. Sudarma, “Analysis of Enterprise Architecture Design Using TOGAF Framework: A Case Study at Archival Unit of Faculty of Agricultural Technology of Udayana University,” Int. J. Eng. Emerg. Technol., vol. 2, no. 2, pp. 52–57, 2017.
R. Perwitasari, R. Afawani, and S. E. Anjarwani, “Penerapan Metode Rational Unified Process (RUP) Dalam Pengembangan Sistem Informasi Medical Check Up Pada Citra Medical Centre,” J. Teknol. Informasi, Komputer, dan Apl. (JTIKA ), vol. 2, no. 1, pp. 76–88, 2020, doi: 10.29303/jtika.v2i1.85.
J. P. Miguel, D. Mauricio, and G. Rodríguez, “A Review of Software Quality Models for the Evaluation of Software Products,” Int. J. Softw. Eng. Appl., vol. 5, no. 6, pp. 31–53, 2014, doi: 10.5121/ijsea.2014.5603.
O. Gordieiev, V. Kharchenko, N. Forminykh, and V. Skylar, “Evolution of software quality models in context of the standard ISO 25010,” Adv. Intell. Syst. Comput., vol. 286, no. January, 2014, doi: 10.1007/978-3-319-07013-1.
E. V Veenendaal, “The New Standard for Software Product Quality." Testing Experience: The Magazine for Professional Testers,” 2014.
S. Anugrah and A. E. Putra, “Analisis Kualitas ISO 25010 Aplikasi Artificial Intelligence Troubleshooting Komputer dengan FURPS,” E-TECH, vol. 6, no. 2, 2018.
M. Rodríguez, R. Oviedo, and M. Piattini, “Evaluation of Software Product Functional Suitability: A Case Study,” Softw. Qual. Prof., vol. 18, no. 3, p. 18, 2016, [Online]. Available: www.asq.org.
S. Riihiaho, “Usability Testing,” Wiley Handb. Hum. Comput. Interact. Set, vol. 1, pp. 255–275, 2017, doi: 10.1002/9781118976005.ch14.
G. Feoh and R. P. Wiryadikara, “Pengujian Functional Suitability Pada Implementasi,” pp. 203–212, 2019.
A. S. Puspaningrum, S. Rochimah, and R. J. Akbar, “Functional Suitability Measurement using Goal-Oriented Approach based on ISO/IEC 25010 for Academics Information System,” J. Inf. Syst. Eng. Bus. Intell., vol. 3, no. 2, p. 68, 2017, doi: 10.20473/jisebi.3.2.68-74.
R. Firmansyah, “Usability Testing Dengan Use Questionnaire Pada Aplikasi Sipolin Provinsi Jawa Barat,” Swabumi, vol. 6, no. 1, pp. 1–7, 2018, doi: 10.31294/swabumi.v6i1.3310.
T. A. Ghaffur and Nurkhamid, “Analisis Kualitas Sistem Informasi Kegiatan Sekolah Berbasis Mobile Web Di Smk Negeri 2 Yogyakarta,” Elinvo (Electronics, Informatics, Vocat. Educ., vol. 2, no. 1, pp. 94–101, 2017, doi: 10.21831/elinvo.v2i1.16426.
S. Nidhra and J. Dondeti, “Black Box and White Box Testing Techniques - A Literature Review,” Int. J. Embed. Syst. Appl., vol. 2, no. 2, pp. 29–50, 2012, doi: 10.5121/ijesa.2012.2204.
W. N. Cholifah, Y. Yulianingsih, and S. M. Sagita, “Pengujian Black Box Testing pada Aplikasi Action & Strategy Berbasis Android dengan Teknologi Phonegap,” STRING (Satuan Tulisan Ris. dan Inov. Teknol., vol. 3, no. 2, p. 206, 2018, doi: 10.30998/string.v3i2.3048.
A. Yulianto, U. P. Jaya, and S. Baru, “Pengujian Psikometri Skala Guttman untuk Mengukur,” vol. 18, no. 2009, pp. 38–48, 2020.
A. Acharya and D. Sinha, “Assessing the Quality of M-Learning Systems using ISO/IEC 25010,” Int. J. Adv. Comput. Res., vol. 3, no. 3, pp. 2277–7970, 2013, [Online]. Available: https://www.semanticscholar.org/paper/Assessing-the-Quality-of-M-Learning-Systems-using-Acharya-Sinha/354f2c5de187b8733c91531a00b2cdd3346005bd.
A. Hidayati, E. Oktariza, F. Rosmaningsih, and S. A. Lathifah, “Analisa Kualitas Perangkat Lunak Sistem Informasi Akademik Menggunakan McCall,” Multinetics, vol. 3, no. 1, p. 48, 2017, doi: 10.32722/multinetics.vol3.no.1.2017.pp.48-53.
I. G. W. Darma, K. S. Utami, and M. Sudarma, “User Experience Analysis on SSO Portal,” vol. 3, no. 2, pp. 2–6, 2018.
A. M. Lund, “Measuring usability with the USE questionnaire,” Usability interface, vol. 8, no. 2, pp. 3–6, 2001.
W. Budiaji, “Skala Pengukuran dan Jumlah Respon Skala Likert (The Measurement Scale and The Number of Responses in Likert Scale),” Ilmu Pertan. dan Perikan., vol. 2, no. 2, pp. 127–133, 2013, [Online]. Available: http://umbidharma.org/jipp.
Authors who publish with this journal agree to the following terms:
1. Copyright on any article is retained by the author(s).
2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
