Simulasi Injection Molding Dalam Pembuatan Gelas Plastik Menggunakan Inventor 2021

Authors

  • Farhan Fadhila Student
  • Viktor Naubnome Universitas Singaperbangsa Karawang
  • Rizal Hanifi Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.29407/jmn.v6i2.20743

Keywords:

Injection Molding, Fill Time, Confidence of Fill, Quality Prediction

Abstract

Proses simulasi Injection Molding dalam pembuatan gelas plastik bertujuan untuk mengetahui hasil dari simulasi suatu produk. Produk gelas plastik didesain dengan menggunakan material plastik jenis Polypropylene PPC 5660, mold base yang digunakan sesuai standard DME tipe E dengan ukuran 346 mm x 346 mm, parameter suhu yang digunakan untuk meleburkan material polypropylene PPC 5660 sebesar 231,03 °C dan suhu temperature mold 42,02 °C. Simulasi yang dihasilkan berupa fill time yaitu waktu yang dibutuhkan dalam mengisi ruang cetakan dengan lama waktu 1,350 detik, confidence of fill yaitu presentase cairan yang telah mengisi cetakan, pada proses ini hasilnya menunjukan 100%, quality prediction untuk mengetahui kualitas produk, hasil dari pembuatan gelas plastik sebesar 99,9% sangat baik ditunjukan dengan warna hijau dan 0,10% cukup baik ditunjukkan dengan warna kuning, cycle time yang dibutuhkan dalam proses ini selama 15,43 detik.

Downloads

Download data is not yet available.

References

N. I. S. A. Diswiratna N, "Analisa dan Perancangan Mold untuk Membuat Mangkuk Plastik dengan Menggunakan Inventor," TEDC, vol. 16, no. 3, pp. 215-219, 2022.

A. Ramadhan, M. Nurfahrezy, M. Yunus and Idiar, "ANALISA PERBANDINGAN SIMULASI ALIRAN PLASTIK TUTUP GALON MENGGUNAKAN SOFTWARE SOLIDWORKS DAN INVENTOR," in PROSIDING SEMINAR NASIONAL INOVASI TEKNOLOGI TERAPAN , Sungailiat, Bangka, 2023.

R. T. d. S. H. Fahmi A, "Perancangan Helm Proyek Menggunakan Metode Injection Molding Plastik Menggunakan CAD," Prosiding Seminar Nasional Aplikasi Sains & Teknologi (SNAST), pp. C-25 - C-34, 2022.

M. R. Khosravani and S. Nasiri, "Injection molding manufacturing process: review of case-based reasoning applications," Journal of Intelligent Manufacturing, vol. 31, no. 7, pp. 847-864, 2020.

L. S. P. S. Kusuma E L, "Analisa Variasi Tekanan , Temperature, Ukuran Runner Terhadap Filling Time Optimal Pada Injeksi Molding," Prosiding SImposium Nasional Multidisiplin, vol. 3, 2021.

M. D. Wibowo and K. Wahyuningsih, "ANALYSIS OF THE EFFECT OF MOLD TEMPERATURE AND MELT TEMPERATURE ONFILL TIME AND QUALITY PREDICTION OF PLASTIC PRODUCTS ININJECTION MOLDING PROCESS USINGAUTODESK MOLDFLOW ADVISOR SOFTWARE," Berkala Penelitian Teknologi Kulit, Sepatu, dan Produk Kulit, vol. 22, no. 2, 2023.

M. A. M. Ali, W. N. Azrina, N. Idayu and Z. Abdullah, "Fill Time Optimization Analysis In Flow Simulation Of Injection Molding Using Response Surface Method," Malaysian Journal on Composites Science and Manufacturing, vol. 4, no. 1, 2021.

H. Jung, J. Jeon, D. Choi and J.-Y. Park, "Application of Machine Learning Techniques in Injection Molding Quality Prediction: Implications on Sustainable Manufacturing Industry," Sustainability, vol. 13, no. 8, 2021.

"Morefuniture," Furniture, 2021. [Online]. Available: https://morefurniture.id/artikel/material-polypropylene. [Accessed 22 Juni 2023].

A. A. Wicaksono A B, "Optimasi Helm Industri Ergonomik Beserta Perancangan dan Simulasi Molding Injeksi," Jurnal Teknik Mesin Indonesia, vol. 17, no. 2, pp. 72-77, 2022.

Downloads

PlumX Metrics

Published

2023-12-31

How to Cite

[1]
F. Fadhila, V. Naubnome, and R. Hanifi, “Simulasi Injection Molding Dalam Pembuatan Gelas Plastik Menggunakan Inventor 2021”, JMN, vol. 6, no. 2, pp. 137–147, Dec. 2023.

Issue

Vol. 6 No. 2 (2023): Jurnal Mesin Nusantara

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Copyright on any article is retained by the author(s).
  2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
Crossref
Scopus
Google Scholar
Europe PMC