Optimizing the Personnel Position Monitoring System Using the Global Positioning System in Hostage Release
DOI:
https://doi.org/10.29407/intensif.v8i1.21665Keywords:
Distance Monitoring, GPS Tracking System, BlynkAbstract
In the contemporary era of globalization, maintaining public order depends on strong security measures. Addressing security challenges, particularly in hostage release scenarios, requires rapid and appropriate responses, highlighting the need for efficient personnel deployment. This research proposes an advanced solution using a GPS Tracking System which uses a sequential method by utilizing digital photos from GPS satellites to monitor the movement of individuals and objects. Specifically applied to the Sandra rescue mission, our research uses the NodeMCU ESP8266 component, which integrates GPS and Wi-Fi functions while considering wind direction. Tests performed demonstrated an impressive success rate of 98.6%, demonstrating the effectiveness of our real-time personnel positioning approach.
Downloads
References
A. Bergek, S. Jacobsson, B. Carlsson, S. Lindmark, and A. Rickne, “Analyzing the functional dynamics of technological innovation systems: A scheme of analysis,” Res Policy, vol. 37, no. 3, pp. 407–429, Apr. 2008, doi: 10.1016/j.respol.2007.12.003.
P. Studi et al., “Kerjasama Keamanan Indonesia Dengan Filipina Dalam Menghadapi Ancaman Kelompok Abu Sayyaf Tahun 2016,” p Haritstyo jaka, vol. hal 6, no. Kerjasama Keamanan Indonesia Dengan Filipina Dalam Menghadapi Ancaman Kelompok Abu Sayyaf Tahun 2016, p. 6, 2018.
R. Koch and M. Golling, “Weapons systems and cyber security-a challenging union,” International Conference on Cyber Conflict, CYCON, vol. 2016-Augus, pp. 191–203, 2016, doi: 10.1109/CYCON.2016.7529435.
M. Mongiello et al., “A smart iot-aware system for crisis scenario management,” Journal of Communications Software and Systems, vol. 14, no. 1, pp. 91–98, 2018, doi: 10.24138/jcomss.v14i1.533.
S. A. Vaerno, A. H. Brodtkorb, R. Skjetne, and V. Calabro, “Time-varying model-based observer for marine surface vessels in dynamic positioning,” IEEE Access, vol. 5, pp. 14787–14796, 2017, doi: 10.1109/ACCESS.2017.2731998.
D. S. R. Krishnan, S. C. Gupta, and T. Choudhury, “An IoT based Patient Health Monitoring System,” Proceedings on 2018 International Conference on Advances in Computing and Communication Engineering, ICACCE 2018, vol. 1, no. I, pp. 1–7, 2018, doi: 10.1109/ICACCE.2018.8441708.
A. S. Syed, D. Sierra-Sosa, A. Kumar, and A. Elmaghraby, “Iot in smart cities: A survey of technologies, practices and challenges,” Smart Cities, vol. 4, no. 2, pp. 429–475, 2021, doi: 10.3390/smartcities4020024.
M. Thibaud, H. Chi, W. Zhou, and S. Piramuthu, “Internet of Things (IoT) in high-risk Environment, Health and Safety (EHS) industries: A comprehensive review,” Decis Support Syst, vol. 108, no. February, pp. 79–95, 2018, doi: 10.1016/j.dss.2018.02.005.
R. Jayaysingh, J. David, M. Joel Morris Raaj, D. Daniel, and D. Blessytelagathoti, “IoT Based Patient Monitoring System Using NodeMCU,” ICDCS 2020 - 2020 5th International Conference on Devices, Circuits and Systems, pp. 240–243, 2020, doi: 10.1109/ICDCS48716.2020.243588.
S. Sucipto, T. Andriyanto, M. N. Muzaki, E. Daniati, R. Indriati, and A. Nugroho, “PERANCANGAN JARINGAN HOTSPOT UNTUK PENINGKATAN LAYANAN TEKNOLOGI INFORMASI,” Antivirus: Jurnal Ilmiah Teknik Informatika, vol. 13, no. 2, pp. 72–79, Nov. 2019, doi: 10.35457/ANTIVIRUS.V13I2.857.
H. Ouldzira, A. Mouhsen, H. Lagraini, M. Chhiba, A. Tabyaoui, and S. Amrane, “Remote monitoring of an object using a wireless sensor network based on NODEMCU ESP8266,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 16, no. 3, pp. 1154–1162, 2019, doi: 10.11591/ijeecs.v16.i3.pp1154-1162.
J. H. Jo, B. W. Jo, J. H. Kim, and I. Choi, “Implementation of iot-based air quality monitoring system for investigating particulate matter (Pm10) in subway tunnels,” Int J Environ Res Public Health, vol. 17, no. 15, pp. 1–12, 2020, doi: 10.3390/ijerph17155429.
C. Perera, C. H. Liu, S. Jayawardena, and M. Chen, “A Survey on Internet of Things from Industrial Market Perspective,” IEEE Access, vol. 2, pp. 1660–1679, 2015, doi: 10.1109/ACCESS.2015.2389854.
Z. K. Zhang, M. C. Y. Cho, C. W. Wang, C. W. Hsu, C. K. Chen, and S. Shieh, “IoT security: Ongoing challenges and research opportunities,” Proceedings - IEEE 7th International Conference on Service-Oriented Computing and Applications, SOCA 2014, pp. 230–234, 2014, doi: 10.1109/SOCA.2014.58.
M. Loyez, M. C. DeRosa, C. Caucheteur, and R. Wattiez, “Overview and emerging trends in optical fiber aptasensing,” Biosens Bioelectron, vol. 196, no. August 2021, 2022, doi: 10.1016/j.bios.2021.113694.
A. Tabatabaei and M.-R. Mosavi, “Performance analysis of GLONASS integration with GPS vectorised receiver in urban canyon positioning,” Survey Review, vol. 51, no. 368, pp. 460–471, Sep. 2019, doi: 10.1080/00396265.2018.1481181.
F. Molaei, E. Rahimi, H. Siavoshi, S. G. Afrouz, and V. Tenorio, “A Comprehensive Review on Internet of Things (IoT) and its Implications in the Mining Industry,” American Journal of Engineering and Applied Sciences, vol. 13, no. 3, pp. 499–515, 2020, doi: 10.3844/ajeassp.2020.499.515.
I. A. Adeyanju, O. O. Bello, and M. A. Adegboye, “Machine learning methods for sign language recognition: A critical review and analysis,” Intelligent Systems with Applications, vol. 12, no. December, p. 200056, 2021, doi: 10.1016/j.iswa.2021.200056.
J. Vallet, “GPS/IMU and LiDAR integration to aerial photogrammetry: Development and practical experiences with Helimap System,” Vorträge Dreiländertagung, pp. 1–10, 2007.
L. Sitanayah, A. Angdresey, and E. Kristalino, “A Real-Time Application for Road Conditions Detection based on the Internet of Things,” JOIV : International Journal on Informatics Visualization, vol. 6, no. 3, p. 629, Sep. 2022, doi: 10.30630/joiv.6.2.891.
I. Chaidir, “Pemanfaatkan GPS (Global Positioning System) Menentukan Posisi Autocare Terdekat Menggunakan Metode Sequential,” Jurnal Teknologi Elektro, Universitas Mercu Buana, vol. 8, no. 2, p. 137, 2017.
M. Z. Sasongko and S. Sucipto, “Desain Prototype IoT Menggunakan Bot Telegram Berbasis Text Recognition,” RESEARCH: Journal of Computer, Information System &Technology Management 4 …, 2021.
W. Hendra Pratama, U. Kurniawan Usman, and S. Dwi Mardiyanto, “Analisis Perencanaan Jaringan Long Term Evolution (LTE) Menggunakan Metode Frequency Reuse 1, Fractional Frequency Reuse dan Soft Frequency Reuse Studi Kasus Kota Bandung,” e-Proceeding of Engineering, vol. 1, no. 1, p. 111, 2014.
K. Peffers, T. Tuunanen, M. A. Rothenberger, and S. Chatterjee, “A Design Science Research Methodology for Information Systems Research,” Journal of Management Information Systems, vol. 24, no. 3, pp. 45–77, Dec. 2007, doi: 10.2753/MIS0742-1222240302.
N. Pradhananga and J. Teizer, “Automatic spatio-temporal analysis of construction site equipment operations using GPS data,” Autom Constr, vol. 29, pp. 107–122, Jan. 2013, doi: 10.1016/j.autcon.2012.09.004.
C. Perera, C. H. Liu, S. Jayawardena, and M. Chen, “A Survey on Internet of Things from Industrial Market Perspective,” IEEE Access, vol. 2, pp. 1660–1679, 2015, doi: 10.1109/ACCESS.2015.2389854.
M. Iqbal, H. Wijanto, U. Kurniawam, J. T. Telekomunikasi, F. T. Elektro, and U. Telkom, “Analisis Perencanaan Jaringan Long Term Evolution Menggunakan Metode Soft Frequency Reuse Di Kawasan Telkom University Analysis of Long Term Evolution Network Design Using Soft Frequency,” vol. 2, no. 2, pp. 1–8, 1800.
K. B. K. Sai, S. Ramasubbareddy, and A. K. Luhach, “IOT based air quality monitoring system using MQ135 and MQ7 with machine learning analysis,” Scalable Computing, vol. 20, no. 4, pp. 599–606, 2019, doi: 10.12694/scpe.v20i4.1561.
J. Krejčí, M. Babiuch, J. Babjak, J. Suder, and R. Wierbica, “Implementation of an Embedded System into the Internet of Robotic Things,” Micromachines (Basel), vol. 14, no. 1, 2023, doi: 10.3390/mi14010113.
M. M. Jaber et al., “Remotely Monitoring COVID-19 Patient Health Condition Using Metaheuristics Convolute Networks from IoT-Based Wearable Device Health Data,” Sensors, vol. 22, no. 3, p. 1205, Feb. 2022, doi: 10.3390/s22031205.
X. Wang, H. Pan, K. Guo, X. Yang, and S. Luo, “The evolution of LiDAR and its application in high precision measurement,” IOP Conf Ser Earth Environ Sci, vol. 502, no. 1, 2020, doi: 10.1088/1755-1315/502/1/012008.
S. Thangavelu, R. Anbazhagan, S. Perumal, E. Gopikrishna, and M. Siddartha, “Unmanned aerial vehicle localization for device-to-device communication in fifth generation networks using modified penguin search optimization,” Computers and Electrical Engineering, vol. 109, no. PA, p. 108757, 2023, doi: 10.1016/j.compeleceng.2023.108757.
Y. Yang, D. Hooshyar, and H. S. Lim, “GPS: Factorized group preference-based similarity models for sparse sequential recommendation,” Inf Sci (N Y), vol. 481, pp. 394–411, May 2019, doi: 10.1016/j.ins.2018.12.053.
D. Flavian, R. Sinde, and M. Kisangiri, “Real-Time IoT-Based Air Quality Monitoring and Health Hazards Indicator System for Mines Regions: A Case Study of Bulyanhulu Gold Mine,” International Journal of Computer Science and Mobile Computing, vol. 12, no. 7, pp. 7–16, 2023, doi: 10.47760/ijcsmc.2023.v12i07.002.
J. Krath, L. Schürmann, and H. F. O. von Korflesch, “Revealing the theoretical basis of gamification: A systematic review and analysis of theory in research on gamification, serious games and game-based learning,” Comput Human Behav, vol. 125, p. 106963, Dec. 2021, doi: 10.1016/j.chb.2021.106963.
M. Mukherjee, L. Shu, and D. Wang, “Survey of fog computing: Fundamental, network applications, and research challenges,” IEEE Communications Surveys and Tutorials, vol. 20, no. 3, pp. 1826–1857, 2018, doi: 10.1109/COMST.2018.2814571.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
1. Copyright on any article is retained by the author(s).
2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
